• Messenger Wire

    Messenger wire consists of high tensile strength stainless steel wire, which is wound around the Detector at the rate of approximately one turn per foot (0.3m).

  • WAW-SS Stainless Steel Cable Clamp

    The WAW-SS is a versatile stainless steel fastener. This clip may be used for ceiling or wall mount applications, as well as corners.

  • JD-1 Mounting Clip

    Stainless steel linear heat detector “J” type mounting clip with 1/4” mounting hole. Specifically designed to help simplify linear heat installations.

  • WAW Clips Types N & P

    One of the most versatile fasteners is the WAW Clip. This clip may be used for ceiling or wall mount applications, as well as all corners.

  • OHS-1 Clip

    OHS-1 clips are available in several different configurations and are used mainly as an intermediate fastener between corner-mounted WAW Clips, which provide the main support.

  • OHS-SS Clip

    The OHS-SS is an all-purpose fastening clip for standalone or for use as an accessory to other mounting devices employed to install Protectowire Line Type Heat Detector.

  • BC-2 Beam Clamp

    The BC-2 Series Beam Clamp assembly consists of a beam clamp, polypropylene WAW Clip, and snap button.

  • BC-3 Beam Clamp Types N and P

    The BC-3 Series Beam Clamp assembly consists of a beam clamp, nylon WAW Clip (type N) or a polypropylene WAW Clip (type P), and snap button.

  • RMC- 2 L Bracket

    The RMC-2 L-bracket consists of a steel bracket, WAW-N clip, and an acetal copolymer snap button.

  • RMC-3 L Bracket

    The RMC-3 L-bracket consists of a 304 stainless steel bracket, WAW-N clip, and acetal copolymer snap button.

  • TR-5G Insulated Standoff

    The TR-5G Insulated Standoff can be used to install Protectowire on or above coal conveyors or from other applicable mechanical structures.

  • HPC-2 Spring Clip

    This single piece UV resistant nylon clip consists of a special snap-lock design, which allows for easy installation or removal of the Protectowire Linear Heat Detector from the fastener.

  • CC-2N & CC-2W Cable Tray Clip

    The CC-2N and CC-2W cable tray clips consist of a “caddy” style steel clamp, WAW, and snap button.

  • CC-10N & CC-10W Cable Tray Clip

    The CC-10 Series Clips are similar in concept to the CC-2s, but utilize a different “caddy” style drive clamp.

  • PM-3A Series Mounting Straps

    The PM-3A is a double loop strap suitable for .75″ to 2″ pipes. The straps are made of black weather-resistant 6/6 nylon and may be used in temperatures ranging from -40°F (-40°C) to 185°F (85°C).

  • PM-3B Series Mounting Straps

    The PM-3B is a double loop strap suitable for 2.5″ to 3.5″ pipes. The straps are made of black weather-resistant 6/6 nylon and may be used in temperatures ranging from -40°F (-40°C) to 185°F (85°C).

  • CTI™ Calibration Kit

    The Protectowire CTI™ Cal Kit includes a type “T” thermocouple probe and  thermocouple jumper. This kit is designed for testing and calibrating CTM modules utilizing the DRTB-T-2 terminal blocks.

  • PM-3C Series Mounting Straps

    The PM-3C includes 2 single loop straps suitable for 4″ to 6″ pipes. They are made of black weather-resistant 6/6 nylon and may be used in temperatures ranging from -40°F (-40°C) to 185°F (85°C).

  • TM-T Cable Ties for Cable Mounts

    Used with TM-M Cable Mounts, the TM-T is constructed of weather-resistant nylon suitable for outdoor use.

  • TM-M Adhesive Cable Mount

    TM-M is used when drilling into mounting surfaces is prohibited or not possible, such as transformer surfaces.

  • TM-A Industrial Adhesive

    The TM-A Industrial Adhesive is used with TM-M Cable Mounts.

  • PIM-530 Interface Module (PHSC)

    The PIM-530 is an interface module with a graphical display for PHSC or PLR linear heat detectors. The module provides one (1) supervised detection circuit that may be field wired for either Class A (Style D) or Class B (Style B) service.

  • PIM-230 Interface Module (PHSC)

    The PIM-230 is an interface module with LEDs for PHSC or PLR linear heat detectors. The module provides one (1) supervised detection circuit that may be field wired for either Class A (Style D) or Class B (Style B) service.

  • PIM-120 Interface Module (PHSC)

    The PIM-120 is a mini-interface module for PHSC or PLR linear heat detectors. The module supports Class B configurations only and is available with an optional intrinsic safety barrier.

  • CTM-530 Interface Module (CTI™)

    The CTM-530 is an interface module with graphical display for CTI linear heat detectors. The module provides one (1) supervised detection circuit that may be field wired for either Class A (Style D) or Class B (Style B) service.

  • CTM-230 Interface Module (CTI™)

    The CTM-230 is an interface module with LEDs for CTI linear heat detectors. The module provides one (1) supervised detection circuit that may be field wired for either Class A (Style D) or Class B (Style B) service.

  • Thermal Imaging Cameras

    Protectowire thermal imaging cameras, powered by Planck Vision Systems deliver high-performance fixed-mount monitoring with integrated thermal and visible-light sensors, enabling proactive detection of abnormal heat conditions before fires occur. Unlike traditional systems that respond only after smoke or flames are visible, these cameras enhance life safety, protect assets, and improve operational reliability by continuously monitoring temperature conditions in critical areas. High-resolution thermal sensors, configurable alarm thresholds, and multiple lens options allow precise detection of overheating across a wide range of applications.

    On-board analytics and head-based processing provide real-time evaluation of thermal data while minimizing network bandwidth usage. The cameras integrate seamlessly with facility management and life safety systems. Dual thermal and visible-light imaging enhances situational awareness, supports condition-based maintenance, and enables event recording, post-incident analysis, and supplemental video surveillance for regulatory compliance and operational review. By identifying elevated temperatures early, Protectowire thermal imaging cameras help facilities mitigate fire risk, minimize property and operational losses, and safeguard personnel.

  • Mini Dual Vision Thermal Networking Camera

    The mini dual-vision thermal imaging camera is a product specially designed for real-time temperature monitoring of assets in close quarters, such as inside equipment cabinets. Offering both thermal and visual cameras in a compact, value-added package, the PWTC20F provides continuous temperature monitoring and alarm notification of critical electrical and mechanical equipment. The PWTC20F has a built-in HD visible camera, LED illuminator, and an infrared thermal imaging core to support 24H non-contact online temperature monitoring and visible inspection. It supports over-temperature alarms, and other functions.

    Download PWTC20F Data Sheet 

  • Thermal Networking Camera

    The use of thermal imaging improves safety, security, visual inspection, productivity, and situational awareness. The PWTC100 thermal imaging cameras are provided with integrated software interface which can identify and locate hot spots and then initiate an automated response. Turning on an alarm, shutting down a system, or targeting the hot spot to activate fire suppression is possible via connection to a control system.

    Camera Features:

    • Perfect for indoor and outdoor with provided sun shield
    • Supports widely adopted protocols
    • Global temperature monitoring with user defined zones
    • Security area-monitoring features
    • Supports user defined alarm protocols
    • Alarm activated outputs and relay contact
    Download PWTC100 Data Sheet

  • ELR-HD-U

    Fiberglass NEMA-4X (IP66) end-of-line box with test switch and U-ELR-1 end of line resistor device.