Skip to content
  • Training
    • In Person Training
    • Online Training
  • Distributor Login
  • News & Events
  • Products
    • Standard Digital Linear Heat Detection
      • Standard Digital LHD (PHSC)
      • PIM-530 Interface Module
      • PIM-230 Interface Module
      • PIM-120 Interface Module
    • CTI™ Linear Heat Detection
      • Confirmed Temperature Initiation™ (CTI™) LHD
      • CTM-530 Interface Module
      • CTM-230 Interface Module
    • Fiber Optic Linear Heat Detection
      • Fiber Optic LHD Cable
      • Fiber Optic Controller
    • Interface ModulesWe offer a line of Protectowire interface modules in order to simplify integration of our detectors onto any fire alarm control panel or addressable node. These modules include features such as alarm point location, modbus output via RS-485, and a 64 event history.
      • PIM-530 Interface Module (PHSC)
      • PIM-230 Interface Module (PHSC)
      • PIM-120 Interface Module (PHSC)
      • CTM-530 Interface Module (CTI™)
      • CTM-230 Interface Module (CTI™)
    • Thermal Cameras
      • PWTC-20 Thermal Camera
      • PWTC-100 Thermal Camera
      • PWTC-200 Series Thermal Camera
    • Spectrex™ Flame Detectors
      • Spectrex™ 40/40D Flame Detector Series
        • Spectrex™ 40/40D-I Ultra Fast Multispectrum Quad-Sense Flame Detector
        • Spectrex™ 40/40D-M Ultra Fast Multi IR Quad-Sense Flame Detector
        • Spectrex™ 40/40D-LB Ultra Fast UV/IR Flame Detector
        • Spectrex™ 40/40D-L4B Ultra Fast UV/IR Flame Detector
      • Spectrex™ 40/40C Flame Detector Series
        • Spectrex™ 40/40C-I Multispectrum Quad-Sense Flame Detector
        • Spectrex™ 40/40C-M Multispectrum Quad-Sense Flame Detector
        • Spectrex™ 40/40C-LB Integrated UV/IR Flame Detector
        • Spectrex™ 40/40C-L4B Integrated UV/IR Flame Detector
      • Spectrex™ 20/20 Flame Detector Series
        • Spectrex™ 20/20Q Flame Detector
        • Spectrex™ 20/20MPI – Commercial IR3 Flame Detector
        • Spectrex™ 20/20ML Mini Series Flame Detector
        • Spectrex™ 20/20MI Mini Series Flame Detector
      • Spectrex™ Flame Detector Accessories
        • Spectrex™ Protective Cover for Flame Detectors
        • Spectrex™ Tilt Mount for Flame Detectors
        • Spectrex™ U-Bolt / Pole Mount for Flame Detectors
        • Spectrex™ Duct Mount for Flame Detectors
        • Spectrex™ Air Shield for Flame Detectors
        • Spectrex™ Cone Viewer for Flame Detectors
        • Spectrex™ Flame Simulator for Flame Detectors
    • Control PanelsProtectowire FireSystems currently offers three types of control panels: FireSystem SRP 4×4, FireSystem 2000, and the FireSystem 2600. These control panels play an integral part in the fire protection process and offer end-users an array of unique features to address diverse applications. The FireSystem 2000 and FireSystem 2600 are both customizable control panels and made-to-order based on your specific application needs.
      • FireSystem SRP-4×4
      • FireSystem 2000 (FS 2000)
      • FireSystem 2600 – DISCONTINUED
      • Battery CabinetsWe offer two different battery cabinets with key locks and vents for proper battery installation.
    • Installation AccessoriesWe offer an assortment of approved accessories and fasteners to facilitate installation of our linear heat detector for a wide range of applications. Protectowire supplied fasteners are generally designed to lightly clamp the detector, which enables a tension to be applied progressively. To ensure a trouble-free installation, only Protectowire supplied or recognized fasteners should be used.
      • Fasteners and Pipe Mounting
      • Splicing and TerminationIn accordance with applicable sections of NFPA 70 National Electrical Code and NFPA 72 National Fire Alarm and Signaling Code, the detector must be installed in continuous runs without taps or branches, or as determined by the local authority. The following should only be used with Digital PHSC Protectowire Digital Linear Heat Detectors: PWSC Splicing Connector (Two-Point) PWSK-3 Field Serviceable Splicing Connector (Three-Point) PWS Splicing Sleeves PFL Flexible Leads The following should only be used with Confirmed Temperature Initiation (CTI) Linear Heat Detectors: CTIC Splicing Kit CTIC-F Female Splicing Connector CTIC-M Male Splicing Connector DRTB-T-2 Terminal Block with Integrated Test Jack The following can be used with Digital (PHSC), CTI or Fiber Optic Linear Heat Detectors: SR-502 Series Junction Box Sealed Strain Relief Connector SR-502N Junction Box Sealed Strain Relief Connector (Nylon) SFTS Sealant Tape (#2228) #35 Splicing Tape (Available in white, red, and blue) 33+ Low Temperature Splicing Tape (Black) SU-15 Wire Dispensing Reel
      • Junction Boxes and Feed CableThe Protectowire Linear Heat Detector portion of every initiating circuit shall terminate at each end in an approved zone box, end-of-line zone box, or other approved junction box provided as part of the system. We offer a complete range of end-of-line and zone boxes to accommodate many different types of applications.
      • Messenger WireMessenger wire is a carrier or support wire which is designed to simplify the installation of the detector in areas where mounting is difficult due to the lack of appropriate support structures or mounting surfaces. Messenger wire is available with any model detector on special order. It consists of high-tensile strength stainless steel wire, which is wound around the detector at the rate of approximately one turn per foot (.3 m).
      • Service Tools
    • Initiating DevicesProtectowire FireSystems offers a complete line of high performance audible and visual initiating devices designed and approved for fire protection.
      • Manual Pull StationsThe SG-42 Series includes high-quality, non-coded fire alarm stations that are available in either single or dual action models. The attractive die-cast metal housing is finished in high-gloss red enamel with raised white letters which enables fast recognition in emergency situations. The SGX-32 models are explosion-proof stations available in either single or dual action configurations. They are UL-listed and FM-approved for use in hazardous environments and weatherproof applications.
      • Spot Heat Detectors- 302 Series Rate AnticipationAll 302 Series detectors are normally open devices and are available in either 135°F (57°C) or 194°F (90°C) ratings. Each unit is constructed with a high expansion .040 anodized aluminum sensing shell and fine silver contacts which are hermetically sealed to ensure reliable operation. Electrical rating is 6-28 VDC, 1 amp. (all models). Refer to product data sheet for FM approval and spacing information.
  • Industries & Applications
    • Power Generation
    • Warehousing & Cold Storage
    • Transportation
    • Oil & Gas
    • Mining & Materials Processing
    • New Construction & Renovation
    • Unique Applications
  • Resources
    • Resource Library
    • FAQs
  • Company
    • About Us
    • Museum
  • Contact Us

DS-9044C-MFL92

Previous

DS-9044C-MFL92

By Lexi|2024-03-21T12:10:15-04:00March 21, 2024|Comments Off on DS-9044C-MFL92

Share This Story, Choose Your Platform!

FacebookXRedditLinkedInWhatsAppTelegramTumblrPinterestVkXingEmail

About the Author: Lexi

THE PROTECTOWIRE COMPANY, INC.
60 Washington Street
Pembroke, MA 02359 U.S.A.
1-781-826-3878
1-781-826-2045

Stay Connected

© 2026 The Protectowire Co., Inc. All Rights Reserved. Terms & Conditions

Website Design by Interthrive

Page load link
main menu
  • Products
    • Standard Digital Linear Heat Detection
      • Standard Digital LHD (PHSC)
      • PIM-530 Interface Module
      • PIM-230 Interface Module
      • PIM-120 Interface Module
    • CTI™ Linear Heat Detection
      • Confirmed Temperature Initiation™ (CTI™) LHD
      • CTM-530 Interface Module
      • CTM-230 Interface Module
    • Fiber Optic Linear Heat Detection
      • Fiber Optic LHD Cable
      • Fiber Optic Controller
    • Interface ModulesWe offer a line of Protectowire interface modules in order to simplify integration of our detectors onto any fire alarm control panel or addressable node. These modules include features such as alarm point location, modbus output via RS-485, and a 64 event history.
      • PIM-530 Interface Module (PHSC)
      • PIM-230 Interface Module (PHSC)
      • PIM-120 Interface Module (PHSC)
      • CTM-530 Interface Module (CTI™)
      • CTM-230 Interface Module (CTI™)
    • Thermal Cameras
      • PWTC-20 Thermal Camera
      • PWTC-100 Thermal Camera
      • PWTC-200 Series Thermal Camera
    • Spectrex™ Flame Detectors
      • Spectrex™ 40/40D Flame Detector Series
        • Spectrex™ 40/40D-I Ultra Fast Multispectrum Quad-Sense Flame Detector
        • Spectrex™ 40/40D-M Ultra Fast Multi IR Quad-Sense Flame Detector
        • Spectrex™ 40/40D-LB Ultra Fast UV/IR Flame Detector
        • Spectrex™ 40/40D-L4B Ultra Fast UV/IR Flame Detector
      • Spectrex™ 40/40C Flame Detector Series
        • Spectrex™ 40/40C-I Multispectrum Quad-Sense Flame Detector
        • Spectrex™ 40/40C-M Multispectrum Quad-Sense Flame Detector
        • Spectrex™ 40/40C-LB Integrated UV/IR Flame Detector
        • Spectrex™ 40/40C-L4B Integrated UV/IR Flame Detector
      • Spectrex™ 20/20 Flame Detector Series
        • Spectrex™ 20/20Q Flame Detector
        • Spectrex™ 20/20MPI – Commercial IR3 Flame Detector
        • Spectrex™ 20/20ML Mini Series Flame Detector
        • Spectrex™ 20/20MI Mini Series Flame Detector
      • Spectrex™ Flame Detector Accessories
        • Spectrex™ Protective Cover for Flame Detectors
        • Spectrex™ Tilt Mount for Flame Detectors
        • Spectrex™ U-Bolt / Pole Mount for Flame Detectors
        • Spectrex™ Duct Mount for Flame Detectors
        • Spectrex™ Air Shield for Flame Detectors
        • Spectrex™ Cone Viewer for Flame Detectors
        • Spectrex™ Flame Simulator for Flame Detectors
    • Control PanelsProtectowire FireSystems currently offers three types of control panels: FireSystem SRP 4×4, FireSystem 2000, and the FireSystem 2600. These control panels play an integral part in the fire protection process and offer end-users an array of unique features to address diverse applications. The FireSystem 2000 and FireSystem 2600 are both customizable control panels and made-to-order based on your specific application needs.
      • FireSystem SRP-4×4
      • FireSystem 2000 (FS 2000)
      • FireSystem 2600 – DISCONTINUED
      • Battery CabinetsWe offer two different battery cabinets with key locks and vents for proper battery installation.
    • Installation AccessoriesWe offer an assortment of approved accessories and fasteners to facilitate installation of our linear heat detector for a wide range of applications. Protectowire supplied fasteners are generally designed to lightly clamp the detector, which enables a tension to be applied progressively. To ensure a trouble-free installation, only Protectowire supplied or recognized fasteners should be used.
      • Fasteners and Pipe Mounting
      • Splicing and TerminationIn accordance with applicable sections of NFPA 70 National Electrical Code and NFPA 72 National Fire Alarm and Signaling Code, the detector must be installed in continuous runs without taps or branches, or as determined by the local authority. The following should only be used with Digital PHSC Protectowire Digital Linear Heat Detectors: PWSC Splicing Connector (Two-Point) PWSK-3 Field Serviceable Splicing Connector (Three-Point) PWS Splicing Sleeves PFL Flexible Leads The following should only be used with Confirmed Temperature Initiation (CTI) Linear Heat Detectors: CTIC Splicing Kit CTIC-F Female Splicing Connector CTIC-M Male Splicing Connector DRTB-T-2 Terminal Block with Integrated Test Jack The following can be used with Digital (PHSC), CTI or Fiber Optic Linear Heat Detectors: SR-502 Series Junction Box Sealed Strain Relief Connector SR-502N Junction Box Sealed Strain Relief Connector (Nylon) SFTS Sealant Tape (#2228) #35 Splicing Tape (Available in white, red, and blue) 33+ Low Temperature Splicing Tape (Black) SU-15 Wire Dispensing Reel
      • Junction Boxes and Feed CableThe Protectowire Linear Heat Detector portion of every initiating circuit shall terminate at each end in an approved zone box, end-of-line zone box, or other approved junction box provided as part of the system. We offer a complete range of end-of-line and zone boxes to accommodate many different types of applications.
      • Messenger WireMessenger wire is a carrier or support wire which is designed to simplify the installation of the detector in areas where mounting is difficult due to the lack of appropriate support structures or mounting surfaces. Messenger wire is available with any model detector on special order. It consists of high-tensile strength stainless steel wire, which is wound around the detector at the rate of approximately one turn per foot (.3 m).
      • Service Tools
    • Initiating DevicesProtectowire FireSystems offers a complete line of high performance audible and visual initiating devices designed and approved for fire protection.
      • Manual Pull StationsThe SG-42 Series includes high-quality, non-coded fire alarm stations that are available in either single or dual action models. The attractive die-cast metal housing is finished in high-gloss red enamel with raised white letters which enables fast recognition in emergency situations. The SGX-32 models are explosion-proof stations available in either single or dual action configurations. They are UL-listed and FM-approved for use in hazardous environments and weatherproof applications.
      • Spot Heat Detectors- 302 Series Rate AnticipationAll 302 Series detectors are normally open devices and are available in either 135°F (57°C) or 194°F (90°C) ratings. Each unit is constructed with a high expansion .040 anodized aluminum sensing shell and fine silver contacts which are hermetically sealed to ensure reliable operation. Electrical rating is 6-28 VDC, 1 amp. (all models). Refer to product data sheet for FM approval and spacing information.
  • Industries & Applications
    • Power Generation
    • Warehousing & Cold Storage
    • Transportation
    • Oil & Gas
    • Mining & Materials Processing
    • New Construction & Renovation
    • Unique Applications
  • Resources
    • Resource Library
    • FAQs
  • Company
    • About Us
    • Museum
  • Contact Us

News & Events

In Person Training

Online Training

Distributor Login

stay connected
Go to Top